Why does paper slip off the forms tractors or tear during printing with my Tally Printer?
If paper slips off the forms tractors or tears during printing, ensure that the forms tractors are positioned correctly for the width of your paper and that the perforated holes of the paper fit directly over the tractor pins.
How do I correct a wrong top margin on my Tally Printer?
To correct a wrong top margin on your Tally Printer, check the application's top margin setting. If necessary, adjust the Top Margin setting in the Page Setup menu.
What does it mean if I get a paper select lever error on my Tally Dascom 1125 Printer?
If paper is loaded and the paper select lever is moved to the incorrect position, the printer turns offline, and the buzzer sounds continuously. To resolve this, switch the paper select lever back to its correct position.
Why are lines double spaced instead of single spaced on my Tally Dascom 1125?
If lines are double spaced instead of single spaced on your Tally Printer, change the Auto LF setting in the System Setup menu to No.
Why does my Tally Dascom 1125 overprint on the same line?
If your Tally Printer is overprinting on the same line, change the Auto CR setting in the System Setup menu to No.
Why does the next print line start where the previous line ended on my Tally Printer?
If the next print line starts where the previous line ended instead of at the left margin, change the Auto CR setting in the System Setup menu to Yes.
Instructions for positioning the printer correctly on a stable surface, ensuring ventilation and access.
Step-by-step guide for installing the printer ribbon cartridge correctly.
Guidance on connecting interface cables (Centronics, Serial, USB) to the printer.
Instructions on how to connect the printer to the power supply, including voltage checks.
Detailed steps for installing the printer driver on Windows operating systems.
How to adjust the print gap lever based on paper thickness for optimal printing.
Procedure to resolve vertical line misalignments in bi-directional printing.
Function to adjust print head pin usage to maintain print quality temporarily.
How to adjust left, top margins, and tear-off position for print output.
Instructions for cleaning the printer housing, platen, and paper rollers.
Solutions for common problems affecting print quality like light/darkness or smears.
Solutions for problems related to paper loading, jamming, and feeding.
General| Type | Dot Matrix Printer |
|---|---|
| Number of Pins | 9 |
| Connectivity | Wired |
| Print Technology | Impact |
| Print Method | Impact |
| Print Width | 80 mm |
| Interface | USB, Parallel, Serial |
| Paper Size | A4, Letter, Custom |
| Noise Level | 55 dB |
| Paper Handling | Manual Feed, Continuous Feed |
To Next Page
