CODE INFORMATION
PROGRAMMING CODE
1. Programming Code provides the ability to fully program and re-
program the deadbolt, add/change/delete user entry codes or unlock
the deadbolt.
2. Programming Code is restricted to 6 digits. The factory preset
Programming Code is: 1-2-3-4-5-6.
USER ENTRY CODE
1. User Entry Code allows the individual user to lock and unlock the
deadbolt.
2. User Entry Code can be 4 to 6 digits long.
3. Maximum of 10 User Entry Codes can be programmed into one
deadbolt.
4. User Entry Codes can be added/changed/deleted to the lockset only
by using the Programming Code.
® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
22
To Next Page
Loading...