® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
28
PROGRAMMING
TEMPORARILY DISABLE ALL USER CODES (VACATION MODE)
IMPORTANT: A valid key is required to unlock the door or the current
programming code to TURN OFF the Vacation Mode
Follow these steps:
1. Press [SET] button for 2 seconds. The Red LED will light up and a
“beep” will sound twice. You are now in the programming mode.
2. Enter 1-2-3-4-5-6 (or current Programming Code) and press the
button. To TURN ON Vacation Mode, enter [ 50 ], press the
button, enter [ 1 ] and press the button. To TURN OFF Vacation
Mode, enter [ 50 ], press the button, enter [ 0 ] and press the
button. The Red LED will light continuously for 10 seconds.
Programming is completed.
To Next Page
Loading...