PROGRAMMING
RESTORE FACTORY SETTING
IMPORTANT:
1. All existing user entry codes and the current programming code
will be deleted.
2. The lock will be restored to preset programming with the
programming code of 1-2-3-4-5-6.
3. Please change the programming code and add a new user entry
code immediately before operating the lock.
Follow these steps:
1. Remove one battery out from the battery pack.
2. Press [SET] button and place the battery back simultaneously.
The Green LED will light up and a “beep” will sound twice.
All functions will be restored back to the factory setting.
® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
32
To Next Page
Loading...