1
® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
IMPORTANT SAFETY INFORMATION
!
WARNING
1. Do not use any abrasives or any chemical products containing any
substance of alcohol, benzene, hydrochloric acid or nitric acid, and
avoid sharp or scratching objects to clean this lockset.
2. Do not let any water or liquid into lockset during installation process.
Note: Electronic mechanisms may be sensitive in cold, harsh conditions
particularly if the environment is also humid. In these conditions, the
manual key may be the most convenient method to operate the lock.
!
IMPORTANT SAFETY INSTRUCTION
1. Do not attempt to disassemble any internal components of the lock-
set personally. You may run the risk of voiding the limited warranty.
2. Do not drop or hit the lockset.
3. Do not use sharp objects to press key buttons.
4. Always create a backup of information you want to keep (such as pro-
gramming code and user entry codes). Please use the last page of
this booklet as your reference.
5. Please change the programming code before operating this lockset.
!
CARE AND MAINTENANCE
The following care instructions should be followed:
1. Remove locks, or do not install locks, prior to painting your door.
2. Periodically clean with mild soap and a soft cloth only.
To Next Page
Loading...