29
® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
PROGRAMMING
DISABLE BUTTON SOUND (MUTE MODE)
IMPORTANT: The mute function will not affect button sounds in the
programming mode
Follow these steps:
1. Press [SET] button for 2 seconds. The Red LED will light up and a
“beep” will sound twice. You are now in the programming mode.
2. Enter 1-2-3-4-5-6 (or current Programming Code) and press the
button. To TURN ON Mute Mode, enter (60), press the but-
ton, enter [ 1 ] and press the button. To TURN OFF Mute Mode,
enter [ 60 ], press the button, enter [ 0 ] and press the button.
The Red LED will light continuously for 10 seconds. Programming is
completed.
To Next Page