Taymor Concierge 300 - Tools Needed for New Installation

® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD. 2
• PENCIL
• CHISEL
• TAPE MEASURE
• HAMMER
• PHILLIPS SCREWDRIVER
• 1” (25 mm) & 1/8” (3 mm) DRILL BITS
• 2-1/8” (54 mm) OR 1-1/2” (38 mm) HOLE BORING KIT
• POWER DRILL
• 2” (51 mm) 6D COMMON NAIL
• 4 - AA ALKALINE BATTERIES
TOOLS NEEDED FOR NEW INSTALLATION
Concierge 300 install booklet ENGLISHnew.indd 5 7/15/15 9:12 AM