PROGRAMMING
TURN ON/OFF THE AUTO-LOCK FUNCTION
Follow these steps:
3. Press [SET] button for 2 seconds. The Red LED will light up and
a “beep” will sound twice. You are now in the programming mode.
4. Enter 1-2-3-4-5-6 (or current Programming Code) and press the
button. To TURN ON Auto-Lock function, enter [ 80 ], press the
button, enter [ 1 ] and press the button. To TURN OFF Auto-
Lock function, enter [ 80 ], press the button, enter [ 0 ] and press
the button. The Red LED will light continuously for 10 seconds.
Programming is completed.
31
® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
To Next Page
Loading...