® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
36
TROUBLESHOOTING GUIDE - OPERATION
QUESTIONS ANSWERS
A. Keypad does not
respond.
1. Check to see if the batteries are properly
installed.
2. Check to see if the Yellow LED light is flash-
ing. It means “the battery is low” if the light
keeps flashing.
3. Make sure the cable is well-connected to the
port.
B. Cannot change
programming
code.
1. Complete the “CHANGE PROGRAMMING
CODE” process by inputting codes within 10
seconds.
2. Make sure you have entered the new pro-
gramming code twice correctly or go back
to the factory setting (refer to page 32) and
lockset again.
C. Cannot delete
all user codes.
1. Make sure all codes are entered within 10
seconds.
2. Make sure you have entered the correct
programming code.
3. button should be pressed for 3 seconds.
To Next Page
Loading...