® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
38
TROUBLESHOOTING GUIDE - OPERATION
QUESTIONS ANSWERS
G. Red LED light is
still on after setting
is completed.
1. Please make sure the [SET] button is not
jammed.
2. Please re-install the batteries.
H. “Auto lock” function
does not work.
1. Please make sure the “Auto Lock” switch
is in the [ON] position.
2. Check to see if the Yellow LED light is
flashing. If the light is flashing, replace all
4 batteries.
I. Yellow LED light
keeps flashing.
1. The batteries are getting low, please
reinstall 4 new batteries for best perfor-
mance (Alkaline batteries are recom-
mended).
J. What should I do if
wrong code was
entered?
1. Press button once and continue to
enter code according to regular proce-
dures.
K. How to illuminate
the keypad?
1. Press any button.
If the lock appears to be damaged or does not function properly, please contact
Taymor Customer Service. taymor.com will provide you with contact
phone numbers.
To Next Page
Loading...