1
Safety Instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings.
8 Install in accordance with the manufacturer’s
instructions.
9 Do not install near heat sources such as radia-
tors, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
10 Only use attachments/accessories specied by
the manufacturer.
11 Refer all servicing to qualied service person-
nel. Servicing is required when the apparatus
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally,
or has been dropped.
Warning!
• To reduce the risk of re or electrical shock,
do not expose this equipment to dripping or
splashing and ensure that no objects lled with
liquids, such as vases, are placed on the equip-
ment.
• Do not install in a conned space.
Service
All service must be performed by qualied per-
sonnel.
Caution
You are cautioned that any change or modica-
tions not expressly approved in this manual could
void your warranty.
EMC/EMI
This equipment has been tested and found to
comply with the limits for a Class B Digital device,
pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in residen-
tial installations. This equipment generates, uses
and can radiate radio frequency energy and – if
not installed and used in accordance with the
instructions – may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television recep-
tion – which can be determined by turning the
equipment off and on –, the user is encouraged
to try correcting the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and the receiver.
• Connect the equipment to an outlet on a
circuit different from the one to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
For Customers in Canada:
This Class B digital apparatus complies with Cana-
dian ICES-003. Cet appareil numérique de la classe
B est conforme à la norme NMB-003 du Canada.
Safety
To Next Page
Loading...
Need help?
General