34
Detailed Operation
Audio Device Name
In the Mac and Windows operating systems, and
with most audio apps you can select VoiceLive
Rack’s audio device by name. In some Windows
XP DAW apps, however, the name of the audio
device may be “Analog Connector (n) VoiceLive
Rack” or “USB Audio Device”.
USB and MIDI Control
To use VoiceLive Rack’s MIDI IN jack for harmony,
preset change or realtime control while USB is
connected, enter the I/O tab in the SETUP menu
and set USB CONTROL to OFF.
USB audio will function normally but MIDI will
only be accepted through VoiceLive Rack’s MIDI
IN jack and not via USB.
To re-enable VoiceSupport’s features and recep-
tion of MIDI from your DAW, turn USB CON-
TROL to ON.
To Next Page
Loading...
Need help?
General