75
MIC-CONTROL Tab Overview
This tab sets parameters for the Mic-Control
switch on the MP-75 microphone and the front
panel Mic-Control switch.
f CONTROL
When turned to ON, this enables effect control
from the mic. The front panel Mic-Control button
can similarly be used when the MIC-CONTROL
setting is set to COPY MIC SWITCH.
Note that this will also turn on phantom power
in VoiceLive Rack if it is not already active. To
avoid unexpected audio pops, mute your mixer
rst. Setting CONTROL to OFF does not de-
activate phantom power.
f FUNCTION
This parameter sets the target for the Mic-
Control switch for the current preset. If the
value reads GLOBAL (nnnnn), this means a single
FUNCTION has been congured for all presets
in the Setup menu’s MIC-CONTROL tab. See the
MIC-CONTROL Tab in the Setup menu descrip-
tion for details.
These functions are:
• HARMONY MOMENT
• DELAY MOMENT
• HARDTUNE MOMENT
• TRANS MOMENT
• REVERB MOMENT
• UMOD MOMENT
• DOUBLE MOMENT
• RHYTHMIC MOMENT
• HARMONY
• DELAY
• HARDTUNE
• TRANS
• REVERB
• UMOD
• DOUBLE
• RHYTHMIC
• HARMONY HOLD*
• TEMPO
• CHOIR
• PITCH
• BYPASS
The MOMENT functions will only activate the
effect while the button is held. All other functions
will remain on or off after tapping the Mic-Con-
trol button.
* Harmony Hold is a feature that sustains the last
harmony syllable indenitely as you hold the Mic-
Control button.
f MIC-CONTROL BUTTON
This setting affects the function of the front panel
MIC-CONTROL button. This button can be
congured to mimic the response of the MP-75
thumb switch or to directly access the MIC-
CONTROL editing tab.
Setting this to COPY MIC SWITCH allows a
quick check of the MIC-CONTROL function as
you will see the target assignment’s button light
e.g. Harmony. When set to HOLD TO EDIT, hold-
ing the MIC-CONTROL front panel button will
display the appropriate edit tab in the display.
The Edit Button
To Next Page
Loading...
Need help?
General