52
LOAD SETUP Tab Overview
In this tab you can load a previously stored setup
prole. If no user proles have been stored, load-
ing any available EMPTY prole will result in all
Setup values going to default values.
Ensure that any connected audio system is muted
when loading setup proles because input and
output levels can vary dramatically.
To load a setup prole:
You must have stored a user setup prole previ-
ously or only default settings will be loaded.
1. Press the Store button and tab over to the
LOAD SETUP tab.
2. Turn the knob below the LOAD FROM
parameter to choose the prole to load. Any
user-stored proles will show DEFAULT if no
name has been assigned.
3. Press the Store button to complete the load
operation. A pop-up will show status.
When done, the new Setup menu parameter
values will be loaded.
The Store Button
To Next Page
Loading...
Need help?
General