23
Picture Mode
Highlight the item and press OK button to enter the sub-menu, that shows the picture mode you can
.
choose
Press button to select Standard/Dynamic/Soft/Vivid/User/ n ergy Savin g. ◄ / ►
Standard Produces a standard image.
Dynamic Enhance the contrast ,color and clarity of the screen, so that the picture in the
dynamic will balance the color.
Soft Reduce the screen contrast , color and clarity to make the screen looks soft.
Vivid Enhance the contrat , color and clarity of the screen to make the color more
vivid.
User Select to customize picture settings.
Energy Saving Redu ce screen brigh tn ess, im proved con trast for en ergy savi
n g.
Contrast
/Brightness/Color/Sharpness
These terms Picture Mode
are available only when "User" is selected in .
Press ▼ / ▲ button to select Contrast
/
Brightness/Color
/
Sharpness.
Press ◄ / ► .
button to adjust
Contrast Adjust the contrast of the image.
Brightness
Adjust the brightness of the image.
Color
Adjust the color intensity of the image.
Sharpness
Adjust the edge sharpness of the image.
Backlight
Press button to select Backlig
ht.
/
Press button to adjust. ◄ / ►
Noise Reduction (Only available under ATV/AV/HDMI source.)
Set up options to eliminate the image noise intensity.
Press button to select Noise Reduction.
/
button toselect Off/Low/Middle/High/Auto.Press ◄ / ►
Aspect Ratio
Press ▼ ▲ button to select Aspect Ratio.
/
Press ◄ / ► button to select
16:9/4:3/Zoom1/Zoom2/Auto.
To Next Page
Loading...
