Remote Control Unit
The supplied remote control
unit
allows
the
unit
to
be
operated from a distance.
When using the remote control unit,
point
it towards the
remote sensor within 60° horizontally and
20°
vertically
of
the front
of
the unit.
•
Even
if the remote control
is
used
within
its effective
operation range (16ft/5
m),
the unit might not respond
to the remote if there
are
any obstacles between them.
• The remote control
might
function incorrectly if it
is
operated near other products that generate infrared
rays
or if other remote control devices that
use
infrared
rays
are
operated near
the
unit. Likewise, the
other
products might
also
function incorrectly.
Battery installation
oRemove the battery compartment
cover.
n Put the lithium-ion battery
(CR2025,
3
V)
in
with the
"+"
side up
D
Close
the cover
Battery replacement
If the distance required between the remote control unit
and main unit decreases, the battery
is
exhausted.
In
this
case,
replace the battery with a new one.
•
For
information about the collection
of
batteries, please
contact
your local municipality, your waste disposal
service or the place where you purchased them.
14
Battery Precautions
•
Be
sure
to insert the battery
with
the positive
"+"
and
negative
u"
polarities correctly positioned
• If the battery
leaks,
wipe
away the leakage inside the
battery
compartment
and replace
the
battery
with
a
new one.
• If the remote control unit
is
not to be used for a long
time (more than a month),
remove the battery from the
remote control unit to prevent it from being exhausted
• Do not
use
any
batteries other than those specified
• Do not heat or disassemble batteries. Never
throw
them
in
fire or water.
•
Do
not
carry or store batteries
with
other
metallic
objects
The
batteries
could
short
circuit,
leak
or
explode
To Next Page
Loading...
