TV Mode Setup Table
Item Name Settings Action
Video Output P-SCAN YPbPr/ S-Video/ HDMI Select
TV System
NTSC/480p/720p60/1080i60/
1080p24/1080p60
Select
Aspect Ratio 4:3 PS/ 16:9/ 4:3 LB Select
Note: For some video film which is with 24 frames per second, you may see poor
quality on the display. Please select 1080p24 as the TV output mode, and make
sure your TV set support 1080p24 before the trial.
Audio Setup
Please make sure the Digital Audio Output mode (SPDIF-PCM / SPDIF-RAW) is
turned on, if you are connecting the Optical/Coaxial cable.
Audio Setup Table
Item Name Settings Action
Digital Audio Output ON / OFF Select
Analog Audio Output
STEREO / MONO R / MONO L
/ MIX MONO
Select
DTS SPDIF RAW (passthrough) -
AAC SPDIF PCM / SPDIF RAW Select
AC3 SPDIF PCM / SPDIF RAW Select
WMA PRO SPDIF PCM / SPDIF RAW Select
Note: For DTS (Digital Theater System) audio tracks, the device passes it through
digital audio output port (Optical or Coaxial cable) to an external decoder.
73
To Next Page
Loading...
