8
1. Introduction
1-6.
Recording media
Open the drive cover of the WX-7000 unit to access the RDX docking
station and SDHC card slot.
1-6-1. RDX cartridge
One internal RDX 3.5-inch drive (HDD or SSD)
Recording capacity
HDD: 500 GB – 1.5 TB
SSD: 64 GB – 512 GB
1-6-2. SDHC card
One SDHC card slot
Compatible media
SDHC cards (SDXC cards not supported)
Recording capacity
4 GB – 32 GB
Recommended speed class
Class 10
1-6-3. Media verified for use
This unit uses RDX cartridges and SDHC cards for recording and
playback.
We provide a list of RDX cartridges and SDHC cards that we have
verified the operation of with this unit on our Industrial Products
Division data recorders website.
http://datarecorder.jp/
You can also contact the sales office of our Industrial Products
Division.
1-7.
TAFFmat format
1-7-1. Type of files
The WX-7000 makes a binary-format data file and ASCII-format
header file each time recording stops or pauses.
Data file: Contains data converted from analog to digital (binary for-
mat with a “dat” file extension)
Header file: Contains recording conditions and other information
(text format with an “hdr” file extension)
o In addition, when voice memos are recorded, their files with “wav”
extensions are also saved.
1-7-2. File name
The file name is common to the data file and header file. An ID
number is added to the end of the specified file name. When you
specify a new file name, the ID number starts from 1. After recording
is stopped or paused, the ID number is automatically incremented
each time the recording restarts. If a data file with the same name
or same ID number already exists when recording to the media, the
next ID number is used.
To specify a file name, choose FILE and RECORDING FILE, and then
specify the file name in FILE. For the file name, use up to 5 half-width
alphanumeric characters.
The system attaches a 3-digit ID number (starting from 001) to these
5 characters to make a total of 8 characters. If the designated charac-
ter is 4 or less, the portion between the characters and the 3 digits
will be filled with “0”, and the number of characters in the file name
will become 8 in total.
To Next Page
Loading...
Need help?
General
