TJ UV Printer User Manual
Choosing a Right Place to Put Printer
p
Precluding place printer in somewhere temperature and humidity are changeable. Likewise, the sun
penetrating directly, strong light or heat. Strong light may influence the sensor of printer’s normally
work.
p
DO NOT place printer in somewhere is apt to dust pollute, electric shock and cause vibrant.
p
Keep enough space around the printer for ventilating; make sure platform of the print can move
forward& backward, upward& downward normally.
p
Please put the printer on a steady and stable workbench, all directions of the workbench are needed
to cover the base of the printer.
p
If the printer is put sloped or have certain angles with ground, it can’t work normally.
p
Put the printer in the place close to outlet; make sure the plug is easy to be pulled out.
p
Please DO NOT put printer so closely to equipments containing magnet.
【！】
Caution
Choose the Power
p
Only use the power type that the relevant parameters of this guide introduce. Incorrect power voltage will
cause fire or an electric shock.
p
Only use the cable attached with the printer. Use other cables to cause fire or an electric shock.
p
Don’t use the cable damaged or broken. Otherwise the machine damage or casualties will happen.
p
When your hand is wet, make sure not to insert or pull out cable in the outlet or the cable from it.
p
DO totally insert the plug in the outlet.
p
Make sure printer is well connected with standard outlet ground wire.
Important Items
Using machine
p
DO NOT touch movable parts or stretch hands into printer when it works.
p
DO NOT do maintenance by yourself without technician’ help.
p
Notice that don’t spatter the liquid on the printer, especially don’t spatter on the fittings with circuit and
signal transmission.
p
Make sure Interfaces are right connected when using USB cable connect printer and computer.
p
DO NOT execute any operations during the self-inspection is proceeding.
p
DO NOT insert or draw USB cable when printer is on.
4
To Next Page
Loading...
