Manual code 75803707A.0708
Page 10 of 64
4 INSTALLATION PROCEDURE
4.1 TRANSPORTATION
Unless otherwise agreed with the Customer, TECNAIR LV shall supply their machines ex works with standard
packaging consisting of: wooden pallet (1), protective polystyrene packing (2,3) and polythene sheet (4).
During transportation the machines must not be laid on their sides or overturned but must remain in the vertical
position at all times otherwise their internal components could be damaged.
As the Carrier is always responsible for damage sustained by the goods during transport, before signing the
delivery note to accept the supply, check the integrity of the packaging and that there are no visible signs of damage to
the conditioner or the leakage of oil or refrigerant.
In the case of evident damage to the unit or if there is slightest doubt as to whether the conditioner has been
damaged during transport, it is necessary to express your reservations in writing to the Carrier, whilst also informing the
TECNASIR LV Sales Department.
To Next Page
Loading...
Need help?
General