Manual code 75803707A.0708
Page 5 of 64
1 HOW TO USE THIS MANUAL
This manual describes the procedures for the installation, use and maintenance of series C air conditioning
units.
The following chapters contain information essential for obtaining the best performance from the unit you have
purchased; TECNAIR LV therefore recommends that you study this manual carefully.
Some of the topics covered in this manual refer to the functions of the microprocessor controls; TECNAIR LV
therefore advises your to read the MICROPROCESSOR CONTROL USER MANUAL, which is also supplied with the
unit, in order to gain a full understanding of the components and functions of your air conditioner.
If after reading this manual you are still experiencing difficulties or require any further clarification, please do not
hesitate to contact our after-sales service:
After-sales office
Tel. +39029699111 / Fax +390296781570
@: info@tecnairlv.it
1.1 IMPORTANT WARNINGS
The equipment described in this manual has been constructed to operate without risk for the intended
purposes, provided that:
• The installation, connection, operation and maintenance of the appliance are carried out by qualified
personnel in accordance with the instructions contained in this manual.
• All the conditions prescribed in the user manual for the unit’s microprocessor control are observed.
Any other use or modification of the equipment,
unless expressly authorised by the manufacturer, is deemed improper.
Any injuries or damage sustained as a result of improper use shall be the sole responsibility of the user.
To Next Page
Loading...
Need help?
General