Manual code 75803707A.0708
Page 35 of 64
6 DEACTIVATION, DISASSEMBLY AND SCRAPPING
WARNING!
BEFORE CARRYING OUT ANY OPERATIONS ON THE UNIT, SET THE MAIN
SWITCH TO POSITION “O”
TECNAIR LV air conditioners must only be dismantled by specialised technical personnel. In any case, the
following points must be observed:
• Switch off the air conditioner first by way of the microprocessor control
• Open the machine’s main door lock switch
• Open the external thermal-magnetic circuit breaker to isolate the air conditioner from the electrical power
supply.
• The refrigerant contained in the air conditioner should be disposed of in accordance with the waste disposal
and safety regulations applicable in the country of installation.
• Disconnect, where applicable, the refrigerant lines, the water connections and the condensate drain lines
from the air conditioner.
• The scrapping of air conditioner is subject to the prevailing legal requirements in the country of installation.
• TECNAIR LV recommends that you contact an authorised waste disposal contractor for this purpose.
• Air conditioners are made primarily from raw materials such as aluminium, copper and steel.
To Next Page
Loading...
Need help?
General