Technaxx TX-51

32
Figure4‐19
Scan Setup
In Figure 4-16, click Scan button.
Use direction buttons to set camera left limit and then click Left button.
Use direction buttons to set camera right limit and then click Right button. Now the scan setup
process is complete.
Figure4‐20
4.4.2.2 Call PTZ Function
Call Preset
In Figure 4-15, input preset value and then click
to call a preset. Click again to stop
call.
Call Pattern
In Figure 4-15, input pattern value and then click
to call a pattern. Click again to
stop call.
Call Tour
In Figure 4-15, input tour value and then click
to call a tour. Click again to stop call.
Call Scan