Technaxx TX-51 User Manual

54
 Delete: Select one device in the Added device list and then click to remove.
 Status:
means connection is OK and means connection failed.
 Delete；Select a device on the Added device list, click Delete button, system disconnect
device first and then remove its name from the list.
 Manual add: Click it to add the IPC manually. The port number is 37777. The default user
name is admin and password is admin.
Figure4‐49
Click the Manual Add button; you can go to the following interface. See Figure 4-50.
Channel number：The dropdown list here displays unconnected channel number. You can go to
Figure 4-49 to set remote channel connection.
Note:
 This series product supports the IPC from many popular manufactures such as Sony, Hitachi,
Axis, Samsung, Dynacolor, Arecont, Onvif and Dahua.
 System default IP address is 192.168.0.0 if you do not input IP address. System will not add
current IP address.
 You can not add two or more devices in the Manual Add interface (Figure 4-50). Click OＫ
button, system connects to the corresponding front-end device of current channel on the
interface.
Figure4‐50

Technaxx TX-51 Specifications

General

Brand	Technaxx
Model	TX-51
Category	Security System
Language	English