36
8.6.3 DDNS Service setting
User can also use DDNS, such as www.dyndns.com, User must apply a free domain name
from this website and fill the info into the below blanks (Figure 8-19) and save the settings.
Then the domain name can be used.
Figure 8-19
Notice: Using the domain name, if the http port is not 80, the port number should be adding
to the domain name with colon. Example: http://btest.dyndns.biz:81.
Also you have to register a new account for the DDNS service by yourself.
8.7 PT configuration (Not supported)
Signal lamp Set open /close to turn the Indicator light ON /OFF
against pre-bit Check the box to disable the preset function.
Call Preset on boot Select the preset position that the camera should move to after the
reboot/ power failure of the camera.
PT Speed Set the speed for the camera movement low, high or fast.
PT Cruise Views Select the amount of cruises from the dropdown menu. The
camera will cruise for the selected amount of cruises. When you
set cruise views to always camera turns all the time but will
automatically stop after cruising one hour.
Figure 8-20