30
8.4 Device basic information
8.4.1 Device information
The user can obtain “Device firmware version”,” Web UI version”, “Alias”, “MAC” and etc.
You also can change the language here. The UPnP setting of the camera is always
activated.
8.4.2 Alias setting
The user can name the camera, example for home, office etc.
8.4.3 Device date and time settings
You can enable “Sync with NTP Server” when the device is connected via WLAN or LAN,
but you need to select the correct time zone where the camera is located, otherwise select
“Sync with PC time” (we suggest this option).
Figure 8-10
Remark: Please carefully check the camera time, so it can be sure the alarm accuracy.
8.4.4 Local recording path
The camera will be automatically create a file folder named “Record files” when the user set
“local recording path” function. Here only manual taken snapshots and recording files will
be saved. To select the path click on “select…” and choose by clicking with the mouse the
right directory. See figure 8-11.
Figure 8-11
To Next Page
Loading...
Need help?
General
Weight and Dimensions
