8
3.1.2 Add camera
Wait for about 90 seconds when the camera started up then operate according to the below
steps:
(1) Tap ”Settings” on your phone and go to “WIFI” option, look for the WIFI network named
like “LEDCAM_XXXXXX”, please connect your phone to it by clicking on it.
(2) Enter the WIFI password, default value is 0123456789, then click ”Join” to save.
(3) Now your phone has been connected to the LED camera WIFI network.
(4) Start the Security Advanced APP, and touch “Add device” to enter the adding device
screen.
(5) Tap “LAN search” to enter the “Search device” screen for searching the camera.
(6) Search out the Device ID, directly touch the camera then return to “Add device” screen.
(7) Enter the camera password.
Notice: The camera factory Settings password is empty, so when the first using of the
camera, no need to enter the password here and can tap the “Done” directly. To ensure
your ongoing privacy, we strongly recommend setting a new password as soon as possible.
(8) Tap“ Done” to save.
Now the camera is added in the “Devices” list successfully.
Important: To connect the camera to your home WIFI router, please refer to chapter 3.3.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
