11
1 GETTING STARTED
DMS-CTC-20130613-0011 v1.0
1.3.5 Status LEDs
Introduction
On the top panel of your MediaAccess Gateway, you can find a number of status LEDs, indicating the state of the device.
Power LED
Broadband LED (if you are using the DSL Gateway scenario)
USB
Internet
Broadband
WiFi
WPS
USB
Ethernet
Power
Colour State Description
Green Solid on Power on, normal operation
Blinking Bootloader active (during upgrade)
Red Solid on Power on, self-test failed, indicating device malfunction
Orange Solid on Bootloader selftest
Blinking Bootloader active (during upgrade)
Off The MediaAccess Gateway is powered off.
Colour State Description
Green Solid on DSL line synchronised
Blinking Trying to detect carrier signal or pending DSL line synchronisation
Off DSL line synchronised and operating in single line mode.
- or -
MediaAccess Gateway powered off.
To Next Page
Loading...
