46
5 SAVING ENERGY
DMS-CTC-20130613-0011 v1.0
5.1 Code of Conduct
Power states
Code of Conduct provides guidelines to optimise and reduce the power consumption devices such as your MediaAccess
Gateway in:
Full power state:
This is the normal operation mode of the device, where all functionality is enabled.
Low power state (dynamic):
When there is no user traffic on the device, the device switches to a low power mode. This is a state in which devices are
only allowed to use a limited amount of energy to be able to power its components and respond to user activity.
Example
Take the following example:
The user switches off his computer at 20:00.
There are no other devices connected to the MediaAccess Gateway.
The MediaAccess Gateway switches to low power mode. This results in a considerable drop in the overall power
consumption of the MediaAccess Gateway.
No user traffic
User traffic
Time
Power
Consumption
Full power limit
Low power limit
20:00
To Next Page
Loading...
