12
1GETTING START
ED
DMS-CTC-20130613-0011 v1.0
Broadband LED (if you are using the Local Router scenario)
Internet LED
WiFi LED
For more information about the WiFi button, see “Wi-Fi button” on page 48.
WPS LED
For more information about WPS, see “4.1 Connecting your wireless client via WPS” on page 38.
Colour State Description
Green Solid on Connected to the WAN device
Off Not connected to the WAN device
Colour State Description
Green Solid on Connected to the Internet, no activity
Blinking Connected to the Internet, sending/receiving data
Red Solid on Failed to setup the Internet connection
Off No Internet connection
Colour State Description
Green Solid on No wireless activity, WPA2-PSK or WPA-PSK encryption
Blinking Wireless activity, WPA2-PSK or WPA-PSK encryption
Orange Solid on No wireless activity, WEP encryption
Blinking Wireless activity, WEP encryption
Red Solid on No wireless activity, no security
Blinking Wireless activity, no security
Off Wireless access point disabled
Colour State Description
Green Solid On Client successfully registered via WPS
Orange Blinking WPS registration ongoing
Red Blinking Error occurred
To Next Page
Loading...
