27
2SETUP
DMS-CTC-20130613-0011 v1.0
2.5.2 Inserting a mobile USB adapter
Procedure
Once the mobile connection is configured you can proceed as follows to insert the mobile USB adapter:
1 Power off the MediaAccess Gateway.
2 Insert your SIM card into the mobile USB adapter.
3 Plug the mobile USB adapter in (one of) the USB port(s) of your MediaAccess Gateway:
4 Power on the MediaAccess Gateway.
If you do not power off the MediaAccess Gateway first, the mobile USB adapter will not be detected.
To Next Page
Loading...
