Technicolor MediaAccess TG588v - Connecting the Mediaaccess Gateway to Your Service Providers Network

16
2SETUP
DMS-CTC-20130613-0011 v1.0
2.1 Connecting the MediaAccess Gateway to your service
provider’s network
Identifying your setup
If you are using the MediaAccess Gateway as:
 DSL Gateway, continue with “2.1.1 Setting up your MediaAccess Gateway as DSL gateway” on page 17.
 Local Router (only possible if the MediaAccess Gateway is equipped with a WAN port), continue with “2.1.2 Setting up
your MediaAccess Gateway as local router” on page 19.
For more information, see “1.2 User scenarios” on page 5, you can use your MediaAccess Gateway in either of the following
scenarios