Technicolor MediaAccess TG588v - Page 24

18
2SETUP
DMS-CTC-20130613-0011 v1.0
Proceed as follows:
1 Take the DSL cable. This is the grey cable that is included in your box.
2 Plug one end of the cable in the grey DSL port on the back of your MediaAccess Gateway.
3 Plug the other end of the cable into the DSL/MODEM output port of your filter/splitter.
Only use the DSL cable provided in the box. Other DSL cables may not work with the DSL subscription that you
purchased.
DSL