50
6SHARING CONTE
NT
DMS-CTC-20130613-0011 v1.0
Configuration
All servers are enabled by default. The only thing that you need to do is to plug your memory stick or external hard disk in
(one of) the USB port(s) of your MediaAccess Gateway.
Use a USB hub to connect up to five USB storage devices to the MediaAccess Gateway. However, make sure to use
a self-powered USB hub!
Do not remove your USB storage device without stopping it first, otherwise data might be lost! For more
information, see “6.5 Safely removing your USB storage device” on page 62.
To Next Page
Loading...
