13
2 Setting up your TG389ac
DMS3-CTC-25-154 v1.0
2 Setting up your TG389ac
Setting up your main services
Proceed as follows:
1 Connect your TG389ac to your service provider’s network.
For more information, see “2.1 Connecting your TG389ac to your service provider’s network” on page 14.
2 Power on your TG389ac.
For more information, see “2.2 Powering on your TG389ac” on page 15.
3 Connect your network devices. To do this using:
A wireless connection, see “3 Wireless networking” on page 22.
A wired connection, see “2.3 Connecting your wired devices” on page 16.
4 Configure your TG389ac using the built-in web interface.
For more information, see “2.5 Configure your TG389ac services” on page 18.
Setting up additional services
When you subscribed you may have purchased additional services or items. For more information on how to:
Connect your phones, see “2.4 Setting up your telephone network” on page 17.
Set up a mobile data fallback connection using a mobile Internet dongle, see “2.6 Set up a mobile fallback connection” on
page 19 for more information.
We recommended you to first connect one computer/tablet (if possible via a wired connection), then complete
the rest of the procedure and as a final step connect the other (wired and/or wireless) devices.
To Next Page
Loading...
Need help?
General
