15
2 Setting up your TG389ac
DMS3-CTC-25-154 v1.0
2.2 Powering on your TG389ac
Procedure
Proceed as follows:
1 Plug the connector of the power supply unit into your TG389ac power inlet port ( ).
2 Plug the power supply unit into a nearby power outlet.
3 Press the power button to turn on your TG389ac.
4 The LED turns on. Wait at least two minutes to allow your TG389ac to complete the startup phase.
Only use the power supply unit that is supplied with your TG389ac. If your current power supply unit is broken,
contact your service provider or reseller.
To Next Page
Loading...
Need help?
General
