26
3 Wireless networking
DMS3-CTC-25-154 v1.0
3.2 How to manually connect a wireless client
Procedure
To connect a wireless client to the wireless network, configure that wireless client with the wireless settings (network name
and wireless key) of your access point.
If your TG389ac is still using the default wireless settings, use the network name (SSID) and wireless key that is printed on
the product label of your TG389ac (or product ID card if included).
You can always find back the current wireless settings via the TG389ac web interface. For more information, see
“Forgot your wireless key?” on page 67
To Next Page
Loading...
Need help?
General
