25
3 Wireless networking
DMS3-CTC-25-154 v1.0
4 Your wireless client may prompt you to select your access point. If this is the case, your access point will be listed with its
Network Name.
Connect your wireless client using WPS PIN code entry on your TG389ac
Proceed as follows:
1 Locate and note the WPS PIN of your wireless client. For more information, consult the documentation of your wireless
client.
2 Browse to the TG389ac web interface.
For more information, see “4.1.1 Accessing the TG389ac web interface from your local network” on page 33.
3 Click Wireless. The Wireless page appears.
4 On the left menu, select the access point to which you want to connect the wireless client to.
5 In the WPS Device PIN code box under Access Point, type the PIN code of your wireless client and click Set PIN code.
In case of problems
If you are having trouble connecting your wireless client via WPS, see “Cannot connect via WPS” on page 68 for more
instructions.
You can find the default network name on the product label of the TG389ac.
To Next Page
Loading...
Need help?
General
