29
3 Wireless networking
DMS3-CTC-25-154 v1.0
3.4.1 Configuring WPA(2)-PSK encryption
Procedure
Proceed as follows:
1 Browse to the TG389ac.
For more information, see “4.1.1 Accessing the TG389ac web interface from your local network” on page 33.
2 Click Wireless. The Wireless page appears.
3 On the left menu, select the access point that you want to configure.
4 In the Security Mode list under Access Point, select one of the following modes:
WPA2-PSK
WPA-PSK + WPA2-PSK
For more information, see “Encryption types” on page 28.
5 In the Wireless Password box, type a the key of your choice. The key must consist of 8 to 63 alphanumeric characters.
For example: MyKey123.
6 Click Save.
7 Reconnect your wireless client(s) to your TG389ac using the new security settings.
For more information, see “3.1 Connecting your wireless client via WPS” on page 23 or “3.2 How to manually connect a
wireless client” on page 26.
To Next Page
Loading...
