The linear counter indicates the amount of tape travel as the
approximate amount of elapsed time.
Linear counter Linear counter
Minutes Minutes
I Seconds I Seconds
t3' uu: I
. {i!!_ _.
T
COUNTER 1 COUNTER 2
RESET RESET
0 0
To reset the linear counter
COU_ER_ Press COUNTER RESET.
RESET
The linear counter indication
"00.00".
will return to
For your reference:
When the tape is travelling in the reverse direction, the value
displayed on the linear counter will count down.
After "00.00" is reached, the value will then start to become
greater, but with a minus sign displayed (example: "-00.08").
The linear counter is not a digital clock. The difference between
the actual recording and playback time and the counter display
may be anything up to several minutes.
Tape side indicator Tape side indicator
/I u,.J,, uuUUli
/- _..., // \
[TPSi [TPS]
[TPS] [In stop mode]
\_-,,,,:_. Press <141 or I_1_.
Becausethis unitis capable of playingback both sides of the
tape, the operationchanges inaccordance withthe directionof
the tape side indicator.
Tape side Rewind Fast-forward
Indicator
• Cassette tapes in deck 1 and deck 2 can be advancedor re-
woundat the same time.
High-speed tape transport
When fast-forwarding from near the beginning of the tape or
whet, rewinding from near the end of the tape, the tape travel
speed will be faster than that during normal fast-forwarding or re-
wind.
(During high-speed tape transport, the [] indication will light up.)
This high-speed tape transport will also function during TPS.
10
To Next Page
Loading...
Need help?
General
