Enjoying the sounds
19
RQT5730
Operations
There may be times when you need to use analog input for DVD,
such as to enjoy sources recorded with linear PCM and multiple
channel linear PCM.
Select the analog input mode to suit the source.
DVD: For two-channel audio.
DVD 6CH: For multiple channel audio.
Press [DVD 6CH INPUT].
Each time you press the button:
DVD ,/ DVD 6CH
Input switches automatically to DVD if you press this button while
another source is selected.
The indicator lights when you select “DVD 6CH”.
Once you have set the mode, that mode is engaged whenever you
select “DVD.”
¡DVD 6CH INPUT only works when SPEAKERS A is on and
SPEAKERS B is off.
¡You cannot use any of the DSP sound modes while DVD 6CH
INPUT is on.
¡Speaker settings (
\
page 13) are ineffective while DVD 6CH
INPUT is on. Change the settings on the DVD player if
necessary.
Note
To switch between DVD 2 channel and 6 channel
input
To use SPEAKERS B
Use SPEAKERS B if you have connected another set of speakers
to the B terminals.
Sound will be heard in stereo while SPEAKERS B is on.
Press [B].
If you don’t want sound coming from the speakers connected to the
A terminals, press [A] to turn them off.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of
Dolby Laboratories.
Confidential unpublished works. c 1992-1997 Dolby
Laboratories. All rights reserved.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942 and other world-wide patents issues and
pending. “DTS” and “DTS Digital Surround” are trademarks of
Digital Theater Systems, Inc. c 1996 Digital Theater Systems,
Inc. All rights reserved.
To Next Page
Loading...
