Technics SA-DX950 Operating Instructions

RAL
FRONT
RBL
+
–
FRONT
R L
SURROUND CENTER
+
–
ERS
PARLEURS
AC IN AC OUTLET
9
RQT5730
Connections
Connecting the AC power supply cord and other information
Household AC outlet
(AC 120 V/60 Hz)
Connect this cord after
all other cables and
cords are connected.
The included AC power supply cord
is for use with this unit only. Do not
use it with other equipment.
Note
Conserving power
The unit consumes 1 W even when it is turned off with [POWER, ^/l].
To save power when the unit is not to be used for a long time, unplug it
from the household AC outlet.
If the unit is left unplugged for longer than a few weeks, all settings will
revert to the factory settings. Do the settings again if this occurs.
“SWITCHED” AC outlet
Power to the outlet is controlled by
the power switch of this unit. Audio
equipment rated up to a maximum of
80 W can be connected here. If
equipment exceeding this rating is
connected, the outlet may be
rendered inoperable. Consult your
dealer to replace the fuse.
Cooling fan
The cooling fan operates at
high power output levels only.
SA-DX1050 only
AC power supply cord
(included)

Technics SA-DX950 Specifications

General

Impedance	8 ohms
Tuning Range	FM, MW
Surround Output	Dolby Pro Logic
Power Output	100 watts per channel into 8Ω (stereo)
Total Harmonic Distortion	0.09%
Inputs	CD, Tape, Video/Aux, Phono, Tuner
Input Sensitivity	200mV (line)
Digital Inputs	Optical, Coaxial
Video Connections	composite
Speaker Load Impedance	8 ohms