The radio
22
RQT5730
You can tune radio stations manually by selecting the station’s
frequency, or you can preset up to 30 stations into channels to
make tuning simpler (
\
page 23).
1 Turn [INPUT SELECTOR] to select
“
TUNER”.
2 Press [BAND] to select
“
FM” or
“
AM”.
3 Press [TUNING
22
or
11
] to select the
frequency of the station.
Tuning intervals: FM – 0.2 MHz
AM – 10 kHz
“
TUNED” lights when tuned.
“
STEREO” lights during FM stereo broadcasts.
Automatic tuning
Hold down [TUNING 2 or 1] until the frequency begins to scroll.
Tuning stops when a station is found. (Tuning may stop if there is
interference.)
Improving reception
FM mode
You can improve FM reception by switching reception to monaural.
Press [FM MODE].
“
MONO” lights.
Press [FM MODE] again to cancel.
DSP DEFEAT
You can improve reception by turning off the DSP (a page 16).
Press and hold [DSP SOUND MODE] until “DEFEAT” appears.
Press and hold [DSP SOUND MODE] again to turn the DSP on.
For your reference
DVD players can interfere with radio reception. Turn the DVD player
off or move it further away from the antennas if this occurs.
Manual tuning
qq
Press [TUNER/BAND].
The band changes each time you press the button.
ww
Press [DIRECT TUNING/DISC ENTER].
ee
Press the numbered buttons to enter the
frequency.
e.g. To select 107.9 MHz, press [1] / [0] / [7] / [9]
Tuning intervals: FM – 0.1 MHz
AM – 10 kHz
1. If you do not press a button while the cursor is flashing, the
display returns to the frequency being received.
2. If the frequency has not been input correctly, “ERROR” will be
displayed.
Note
To Next Page
Loading...
