Technics SL-1500C User Manual

English
(10)
10
Putting the player together
In order to prevent damage during shipping, some of the equipment has been disassembled.
Put the player together in the following order.

Before setting up, put on the stylus guard to protect the stylus tip (

18), return the tone arm to
the arm rest and fix it with the arm clamp.

Do not connect the AC power supply cord until set up is complete.

When fitting the turntable, prevent foreign material from getting in between the main unit and
turntable.

Do not touch or scratch the board.
Turntable
Board
Center spindle
Balance weight
Turntable mat
Head shell
Attention
Handle carefully as
this is heavy.

Technics SL-1500C Specifications

General

Drive Method	Direct Drive
Wow and Flutter	0.025% WRMS
Platter	Aluminum Die-cast
Phono EQ	Built-in
Weight	9.9 kg
Motor	Brushless DC Motor
Effective Tonearm Length	230 mm
Overhang	15 mm
Phono Output	Yes
Line Output	Yes
Auto Lift	Yes
USB Output	No
Bluetooth	No
Power Supply	AC 110 - 240 V, 50/60 Hz
Turntable Speeds	33 1/3, 45, 78 rpm
Tonearm Type	Static Balance
Cartridge	Ortofon 2M Red
Dimensions	453 x 169 x 372 mm
Signal-to-Noise Ratio	78 dB