Technics SL-1500C

English
(18)
Playing records
18
Speed select buttons
Indicators
·
3 4
2
Center spindle

1

2

2
Preparation

1 Put a record (not included) on the turntable.

2 Take off the stylus cover and release the arm clamp.
1


Removing the stylus cover
Hold the stylus cover from its front
and back, and while pushing the
latch on the rear part (

), slowly
tilt the stylus cover downward (

).


Attaching the stylus cover
Hold the stylus cover from its
front and back, align with the
front of the cartridge, and
slowly lift it (

) taking care not
to damage the stylus.
Cartridge
Stylus cover
①
③
②
1
Press [ ] to turn the unit on.
33-
1
/
3
rpm is automatically selected and
the indicator [33] lights.
2
Press [START-STOP].
The turntable starts revolving.
Attention

Do not press [START-STOP] when the turntable is removed.
If you have accidentally pressed [START-STOP]
·The indicator of the speed select button ([33] or [45]) starts blinking.


If it is blinking, press [ ] to turn the unit off, fit the turntable and then press [ ] to turn
the unit on.

Turn the unit on or off with the volume on the connected device set to the minimum.
ピピ フブ
ヘベ
ヴヵモンヵ〔ヴヵヰヱ
ピピ
Indicator