Technidea ZIPLEVEL PRO-2000 User Manual

Use the keypad on the Measurement Module to control the ZIPLEVEL
®
and
take readings. The most frequently used functions, called labeled functions,
are printed on the eight keys below the display.
ZIPLEVEL’s more advanced or less frequently used functions, called hidden
functions, may be accessed by logical combinations of two or more keys. All
keys except the HOLD and ON/OFF keys must be pressed and held for two
seconds to activate. This minimizes accidental operation of the functions.
Distinctive audible and display indicators ease use – you will soon learn to
recognize them. For example, when a measurement is nearly stable enough
to read, you will hear two short ‘read ready’ beeps. When storing a reading,
ZIPLEVEL
®
emits short, regular beeps while the display ashes. When the
reading is stable enough to store, the unit then emits a single long tone.
Note: All stored measurements and settings are retained indenitely once
power is shut off and even without a battery installed.
5 ▪ KEYPAD KEYPAD & DISPLAY ▪ 6
Flashes when
battery is low.
Flashes when calibration is
required due to temperature.
Main Display Digits
Flashes when re-zero required
due to temperature.
Scale
indicators
Fraction bar ashes
in MARK mode.
Every key clicks
and beeps when
pressed.
Hand grip area
Press 2 seconds
for these 6 keys
to enter function.
Record indicators
REC ashes in RECORD DATA function.
On when display value is frozen.

Technidea ZIPLEVEL PRO-2000 Specifications

Ranges

set-up vertical range	40’ (12m)
set-up horizontal range	200’ (60m)
carry function range	No limit

Accuracy

reading repeatability	0.1” (2mm) or 0.01” (0.2mm) HP
leveling accuracy	0.1” (2mm) or 0.01” (0.2mm) HP
elevation accuracy	Greater of 0.1” (2mm)/0.01” (0.2mm) HP or 0.2% reading <10’ (3m) & 0.35% reading >10’

Capacity

record capacity	16, 384
record data capacity	137 readings
settings/data retention	Indefinitely, even without battery

Operating Environment

operating temperature range	-22°F to +158°F (-30C to +70C)
storage temperature range	-40°F to +158°F (-40C to +70C)
shock resistance	Measurement Module – 5’ (2m) drop on concrete

Battery

battery type	9V alkaline
battery life	60 hours active use
auto shut-off time	4 minutes inactive