EN-33
Auto Exposure Bracketing (AEB)
In this mode, the camera automatically changes the exposure within a set range to take
three shots after you press the shutter button once. AEB settings can be combined with
exposure compensation settings to extend the adjustment range.
1. Rotate the mode dial to
A, D, @, E, F or
G and turn your camera on by pressing the S
button.
In
A (Auto) Mode, press W to access
in menu directly.
2. Press W, then use y to select the
[Mode2] menu.
3. Use w to select [Capture Mode], then press
the e button.
4. Use v or w to select [AEB], then press the
e button.
5. To exit from the menu, press the
W button.
The
R indicator is displayed on the
monitor screen.
6. Press the shutter button to shoot.
• In AEB mode, the flash mode will be set to OFF automatically.
To Next Page
Loading...
Need help?
General
