EN-34
Selecting the Metering Mode
You can select the metering mode that sets which part of the subject to measure to
determine the exposure.
1. Rotate the mode dial to D, E, F or G and
turn your camera on by pressing the
S button.
2. Press
W, then use y to select the
[Mode2] menu.
3. Use
w to select [Metering], then press the
button.
4. Use v or w to select the desired metering
mode, then press the e button.
[
p Center-Weighted]: Averages the light
metered from the entire frame, but
gives greater weight to the subject
matter at the center.
[
q Spot]: Meters the area within the spot
automatic exposure point frame at the
center of the LCD monitor.
5. To exit from the menu, press the W button.
6. Compose your subject within the focus frame.
7. Press the shutter button to capture the image.
To Next Page
Loading...
