EN-48
Connect the digital camera to your computer
1. Connect one end of the USB cable to an available USB port on your computer.
2. Turn your camera on by pressing the
S button.
3. [USB Mode] appears on the screen.
4. Use
w to select [PC], then press the e button.
Download images or video clips
When the digital camera is turned on and connected to your computer, it is considered
to be a disk drive, just like a floppy disk or CD. You can download (transfer) images by
copying them from the “Removable disk” (“untitled” or “unlabeled” disk on a Macintosh)
to your computer hard drive.
Windows
Open the “removable disk” and double click on the DCIM / DSCIM folder to open it to
find more folders. Your images are inside these folder(s). Select the desired still images
or video clips and then choose “Copy” from the “Edit” menu. Open the destination
location (folder) and choose “Paste” from the “Edit” menu. You may also drag and drop
image files from the digital camera to a desired location.
Macintosh
Open the “untitled” disk icon, and the destination location on your hard disk. Drag and
drop from the digital camera to the desired destination.
• Memory card users may prefer to use a memory card reader (highly
recommended).
• Video playback application is not included with the package. Make sure
that video playback application has been installed in your computer.
To Next Page
Loading...
Need help?
General
