EN-52
Step 2: Connect the digital camera to your
computer
1. Connect one end of the USB cable to an available USB port on your computer.
2. Turn your camera on by pressing the
S button.
3. [USB Mode] appears on the screen.
4. Use
w to select [PC CAM.], then press the e button.
Step 3: Run your application software (i.e.
Windows NetMeeting)
To use Windows NetMeeting for videoconferencing:
1. Go to Start Æ Programs Æ Accessories Æ Communications Æ NetMeeting to
launch the NetMeeting program.
2. Click the Start Video button to view live video.
3. Click the Place Call button.
4. Type the e-mail address or the network address of the computer that you are
calling.
5. Click Call. The person that you are calling must also have Windows NetMeeting
running and be willing accept your call to start the videoconference.
• When using this digital camera as a PC camera, it is necessary to install
the battery into the digital camera.
• The video resolution for videoconferencing applications is generally
640 x 480.
• For more information about the operation of videoconference application
software, refer to its respective help documentation.
To Next Page
Loading...
